Product Name: Tridecyl Methacrylate
Synonyms: Methacrylic acid tridecyl ester
CAS Number: 2549-53-3
Recommended Use: Lubricant additive, viscosity modifier, polymer synthesis
Supplier Details: Varies by manufacturer; ensure label matches commercial source
Emergency Contact: Refer to local regulations or supplier communication
GHS Classification: Not classified as hazardous per OSHA Hazard Communication Standard
Health Hazards: May cause mild skin and eye irritation. Prolonged exposure can trigger dermatitis symptoms in sensitive individuals.
Environmental Hazards: Not acutely toxic, but poor biodegradability means spills threaten aquatic life if unmanaged.
Label Elements: No pictogram required under GHS; precautionary statements apply
Signal Word: None
Hazard Statements: Can irritate skin and eyes
Precautionary Statements: Avoid direct contact and prevent release to waterways
Chemical Identity: Tridecyl Methacrylate
Molecular Formula: C17H32O2
Impurities: Small amounts of methacrylic acid or stabilizers possible
Purity: Typically exceeds 98%
Other Components: None with recognized hazards at typical concentrations
Inhalation: Move person to fresh air. Symptoms like headache may resolve with exposure to clean air.
Skin Contact: Wash with plenty of soap and water. Remove contaminated clothing and wash before reuse.
Eye Contact: Rinse gently with water for at least 15 minutes. Remove contacts if present and easy. Seek advice if irritation does not subside.
Ingestion: Rinse mouth with water. Seek medical help if symptoms appear.
Notes for Physicians: Treat symptomatically; supportive care for skin and respiratory irritation
Suitable Extinguishing Media: Foam, CO2, dry chemical, water spray
Specific Hazards: Vapors can form during combustion; generates toxic fumes like carbon oxides
Protective Equipment for Firefighters: Wear self-contained breathing apparatus and full protective gear
Firefighting Instructions: Avoid inhaling fumes; dike runoff to prevent environmental release
Personal Precautions: Wear protective gloves and goggles. Ensure proper ventilation.
Environmental Precautions: Contain the spill and prevent entry into drains or waterways.
Spill Cleanup: Absorb with sand, earth, or inert material. Scoop into labeled waste container. Wash area with detergent and water.
Handling: Avoid breathing vapor or mist. Use gloves and eye protection.
Hygiene Considerations: No eating, drinking, or smoking in handling area. Wash hands after use.
Storage Recommendations: Store in original container, tightly closed, in a cool, dry, well-ventilated area.
Storage Temperature: Keep below 40°C for optimal stability; freezing not recommended
Engineering Controls: Adequate ventilation or localized exhaust to minimize vapor buildup
Occupational Exposure Limits: No established limits for Tridecyl Methacrylate as of June 2024
Respiratory Protection: Respirator in case of high vapor concentrations
Hand Protection: Nitrile or neoprene gloves
Eye Protection: Safety glasses or chemical splash goggles
Skin Protection: Long sleeves and chemical-resistant clothing for large-scale use
Appearance: Clear, colorless to light yellow liquid
Odor: Mild, ester-like
Boiling Point: Above 120°C
Melting Point: Below -30°C
Flash Point: Approximately 130°C
Auto-Ignition Temperature: Not readily available; above 250°C estimated
Solubility: Insoluble in water, miscible with organic solvents
Vapor Pressure: Low at ambient temperature
Density: About 0.87 g/cm3 at 20°C
Viscosity: Medium/high, varies with temperature
pH: Not applicable (insoluble in water)
Chemical Stability: Stable under recommended storage conditions
Hazardous Reactions: Polymerization risk in presence of heat, UV, or strong acids
Incompatible Materials: Strong oxidizers and acids
Decomposition Products: Carbon monoxide, carbon dioxide, possible formaldehyde under thermal breakdown
Other Notes: Adding stabilizers can lengthen shelf life and reduce risk of unwanted polymerization
Acute Toxicity: Low oral and dermal toxicity based on analog data
Skin Irritation: May cause redness after prolonged contact
Eye Irritation: Potential for mild irritation
Respiratory Effects: Vapors, if generated, may trigger headaches or dizziness
Chronic Toxicity: No evidence linking to cancer or genetic harm in current data
Sensitization: Rare; not common but possible in sensitive populations
Other Health Info: No established occupational exposure limits so prudent practice goes a long way
Ecotoxicity: Not acutely harmful, but long-term buildup risks disrupting local fauna if large amounts leak
Persistence and Degradability: Degrades slowly; little biodegradability in typical conditions
Bioaccumulative Potential: Moderate persistence means it can concentrate in aquatic organisms over time
Mobility in Soil: Low; binds with organic matter and soil particles
Other Effects: Spilled material can spread film over water, threatening oxygen exchange
Waste Handling: Collect and label waste containers appropriately. Dispose at licensed hazardous facility.
Recommended Disposal: Incineration preferred; follow local, state, and federal waste rules
Uncleaned Packaging: Rinse thoroughly before recycling or disposal
Special Considerations: Avoid release to sewers or surface water
UN Number: Not regulated as dangerous goods
Transport Hazard Class: Not classified
Packing Group: Not assigned
Environmental Hazards: Care needed to prevent leaks in transit
Precautions for Transport: Keep container upright and secure. Prevent physical damage and exposure to direct sunlight.
OSHA: Not listed as hazardous
TSCA: Listed in the United States Toxic Substances Control Act Inventory
EINECS/ELINCS: Registered in the European Union chemical inventories
SARA Title III: Not subject to reporting under Sections 302, 304, or 313
Other National Inventory Listings: Compliant in major jurisdictions (Japan ENCS, Australia AICS, Canada DSL)
Labeling: Standard packaging label; precautionary phrases for skin/eye irritation
